Product Support

Manhattan T4•R
Manhattan T4•R > Your T4•R Remote

Controlling your TV with the T4•R remote

You can teach the five high­lighted but­tons on the {shortmodel}’s remote to con­trol your TV:

  • TV power
  • TV input selection
  • Volume +
  • Volume –
  • Mute

Ini­tially, the Volume and Mute but­tons con­trol your T4•R’s sound. How­ever, for the best sound qual­ity and con­sist­ent volume across your TV’s sources, you can teach these but­tons to con­trol your TV’s volume dir­ectly instead. It’s very import­ant that if doing this you set the volume on your T4•R’s remote to max­im­um before you teach them to con­trol your TV instead, as you will not be able to adjust the T4•R’s volume level once after teach­ing them to con­trol your TV’s volume level instead.

If you have a sound­bar or AV receiv­er that has its own infrared remote con­trol, you also have the option

The and but­tons do noth­ing until you teach them to con­trol these func­tions on your TV.

Learning Steps

Please fol­low the steps below or watch the video to teach the remote how to con­trol your TV.

⚠️ Before Start­ing #

  • Set your T4•R’s volume to max­im­um to ensure the cor­rect volume level from your TV after learn­ing is complete.
  • Put your T4•R in standby to avoid it respond­ing to the T4•R remote dur­ing the learn­ing steps.
  • Place your T4•R and TV remotes on a flat sur­face, facing each oth­er, a small dis­tance apart.

1. Press the S/AD and ZOOM but­tons on the T4•R remote for 3 seconds to enter learn­ing mode.

→ The T4•R remote’s but­ton will glow blue.

2. Press the but­ton on the T4•R remote you want to teach: Volume +, Volume –, Mute, or .

→ The T4•R remote’s but­ton will start blinking.

3. Press and hold the cor­res­pond­ing but­ton on the TV remote.

→ If suc­cess­fully learnt, the light from the T4•R remote’s but­ton will turn off for a second, then turn sol­id blue. → If it fails to be learnt, the light from the T4•R remote’s but­ton will flash 4 times, and you will need to repeat Step 2.

4. Repeat steps 2 and 3 for all the but­tons to teach.

5. Press OK on your T4•R remote to exit learn­ing mode.

→ The light from the T4•R remote’s but­ton will turn off.

Test the But­tons #

Test each but­ton with your TV. If a but­ton does not work, repeat the steps to teach it again. Please note that some TVs use non-stand­ard remote sig­nals and may not be com­pat­ible with the T4•R remote.

Still need help?