Product Support

Manhattan T4•R
Manhattan T4•R > Your T4•R Remote

Pair your T4•R and remote to prevent interference with other Manhattan devices

Your T4•R comes with a pair­ing fea­ture that con­nects your remote and box spe­cific­ally to each oth­er. Once paired, only that remote can con­trol that box, and that box will only respond to that remote. This fea­ture is par­tic­u­larly use­ful if you’ve got one or more older Man­hat­tan products that you want to use along­side a T4•R. It allows you to:

  • Use up to nine T4 or T4•R’s in the same room without them inter­fer­ing with each other.
  • Use up to eight T4 or T4•R’s in the same room as a T2•R, T3 or T3•R without any interference.

How to pair a T4•R remote and T4•R box #

While your T4•R is turned on and active:

  1. Press and hold the but­ton and a num­ber but­ton (1−9) on the T4•R remote for 3 seconds.
  2. A mes­sage will appear on the screen con­firm­ing that the remote and box are paired on that channel.

Import­ant notes about chan­nels #

Chan­nel 0 (Uni­ver­sal)

  • When a remote or box is set to Chan­nel 0, they will work togeth­er regard­less of pairing.
  • On this chan­nel, a T4•R will also respond to T2•R, T3, and T3•R remotes.
  • When you fact­ory reset a T4•R, it will revert to Chan­nel 0, but its remote con­trol will not. How­ever, because Chan­nel 0 is uni­ver­sal, the T4•R will still respond to the T4•R remote.

Chan­nel 1

  • This chan­nel is used by the T2•R, T3, and T3•R.

  • If you pair your T4•R on Chan­nel 1:

    • The T4•R remote will oper­ate T2•R, T3, and T3•R boxes.
    • The T4•R box will respond to T2•R, T3, and T3•R remotes.

Chan­nels 2 – 9

  • These chan­nels are not used by any pre­vi­ous Man­hat­tan models.
  • If you’re using a Man­hat­tan T2•R, T3, or T3•R in the same room as your T4•R, use chan­nels 2 to 9 for pair­ing your T4•R remote and box. This will pre­vent inter­fer­ence between devices.

How to check the chan­nel set­ting of a T4•R remote and T4•R box #

While the T4•R is turned on and active:

  1. On the T4•R remote, press and hold both the and but­tons at the same time for 3 seconds.
  2. The T4•R will dis­play a mes­sage on the screen indic­at­ing its chan­nel number.
  3. The remote’s standby but­ton will flash blue to indic­ate the channel:
    • Flashes cor­res­pond to chan­nel num­ber (e.g., 5 flashes for Chan­nel 5)
    • Sol­id blue for 3 seconds indic­ates Chan­nel 0 (Uni­ver­sal)

Still need help?